European consortium to standardise fuel cell modules for heavy duty applications: the “StasHH mission”

A European consortium consisting of 25 leading organisations in the hydrogen sector are joining forces to define, develop and test the first European standard for fuel cell modules for heavy duty applications. This standard for fuel cell modules may be the game changer that the fuel cell industry requires to enhance market competitiveness by enabling competition, cost reduction and mass production. The consortium operating together as “StasHH” comprises 11 fuel cell module suppliers, 9 original equipment manufacturers and 5 research, test, engineering and/or knowledge institutes and will standardise physical dimensions, flow and digital interfaces, test protocols and safety requirements of the fuel cell modules that can be stacked and integrated in heavy duty applications like forklifts, buses, trucks, trains, ships, and construction equipment. The consortium receives 7.5 M€ funding from the European Union, through the Fuel Cells and Hydrogen Joint Undertaking, in order to kickstart the adoption of fuel cells in the heavy duty sector. The total budget is 15.2 M€.

The size nomenclature for batteries has been well established over time and became known as the “AA-series” nomenclature and has resulted in a rapid adoption of battery technologies into a wide variety of applications. A similar nomenclature, denoted as the “HH-series” is envisioned by the StasHH consortium for fuel cell modules, which are at the heart of any fuel cell system. Upon reaching an industrial consensus between fuel cell module suppliers and OEMs regarding the standard, the fuel cell module suppliers in the consortium will design and develop standardised modules for different power classes. The modules will be tested by the test centres in the consortium upon key indicators to benchmark performance and safety. Meanwhile the consortium will make a committed and devoted effort to promote the standard at the appropriate European and international regulation, codes and standards platforms to enable the worldwide adoption of the standard. Proper dissemination is guaranteed and exploitation efforts to external fuel cell module suppliers and OEMs is foreseen.

The 25 organisations that are part of the StasHH consortium are Alstom Transport SA, AVL List GmbH, Ballard Power Systems Europe A/S, Centro per gli Studi di Tecnica Navale CETENA S.p.A., Commissariat à l’Energie Atomique et aux Energies Alternatives, DAMEN, ElringKlinger Fuelcell Systems Austria GmbH, FCP Fuel Cell Powertrain GmbH, FEV Europe GmbH (supported by FEV Software and Testing Solutions GmbH), Freudenberg FST GmbH, Future Proof Shipping BV, Hydrogenics GmbH, Intelligent Energy Limited, Nedstack Fuel Cell Technology, Netherlands Organization for Applied Scientific Research (TNO), Nuvera Fuel Cells Europe, Proton Motor Fuel Cell GmbH, SINTEF AS, Solaris Bus & Coach sp. z o.o., Symbio SAS, Toyota Motor Europe NV/SA, VDL Enabling Transport Solutions BV, VDL Energy Systems, Volvo Construction Equipment (supported by Volvo Technology and Volvo Penta), WaterstofNet vzw.

The StasHH project has received funding from the Fuel Cells and Hydrogen 2 Joint Undertaking under Grant Agreement No 101005934. This Joint Undertaking receives support from the European Union’s Horizon 2020 Research and Innovation programme, Hydrogen Europe and Hydrogen Europe Research.

 

Bart Biebuyck, Executive Director, Fuel Cells and Hydrogen Joint Undertaking (FCH JU) said: “We are proud to support this strategically important project as a main step towards the decarbonisation of the transport sector. The project outcomes of StasHH will not only stimulate greater competition among fuel cell suppliers, but will also enrich the offer and make it easier to integrate fuel cells systems in heavy-duty powertrains. With its specific focus on the heavy-truck sector, this project will play an essential role in reaching the common target of 100.000 trucks by 2030 set in the joint coalition statement of industry representatives last December.”

According to Federico Zenith, coordinator of the StasHH consortium: “StasHH is Europe's best chance to jump-start the adoption of hydrogen in heavy-duty mobility, a sector that cannot be easily electrified with batteries due to weight, cost or other limitations. Pooling together multiple markets and enabling competition, mass production and automation, we aim to make a decisive contribution to the phase-out of fossil fuels and to deploy new technology for a better society.”

Ruud Bouwman of VDL, member of the StasHH consortium adds: “Standard sized fuel cell modules are a prerequisite for adaptation and acceptance of the many different stakeholders in the various fields of application, therefore this project marks the start of a new era. Now we can finally show the potential of hydrogen and break through ‘old’ prejudices. We as VDL partner in this project and we are eager to use these modules in all kinds of applications throughout a range of applications of our Group companies.”

 

About the Fuel Cells and Hydrogen Joint Undertaking

The Fuel Cells and Hydrogen Joint Undertaking (FCH JU) is a Public Private Partnership in which the European industry, research, academia (represented by Hydrogen Europe and Hydrogen Europe Research) and the EU (represented by the European Commission) work together to accelerate the deployment of fuel cell and hydrogen technologies. The FCH JU supports a wide range of projects, which help to put the EU at the forefront of research and innovation, bring the benefits of the technology to the citizens and enhance industry competitiveness.

More info

SINTEF (NO)
Consortium coordinator
Federico Zenith, federico.zenith@sintef.no, +47 93053023

WaterstofNet (BE)
Dissemination and exploitation leader
Michel Honselaar, michel.honselaar@waterstofnet.eu, +32 488471507