PemGen CHP-FCPS-1000

The CHP-FCP-1000 is a PEM Fuel Cell Power System intended for industrial applications, Power-2-Power purposes for solar fields and wind farms and for co-generation applications in the built environment. The CHP-FCPS-1000 is optimized for seamless integration in local or collective electricity grids by being able to use all sorts of commercial off-the-shelf power electronics. The PemGen Fuel Cell Power System portfolio is available on a configure-to-order basis. Get in touch to tune this system for your specific application.
General Fuel Cell Type Low Temperature Proton Exchange Membrane (LT-PEM)
Fuel Cell Model 120x Nedstack FCS 13-XXL
ELECTRICAL Nominal Power 1000 kWe
Peak Power (BoL) 1252 kWe
Voltage range 500 - 1000 VDC
Current range 0 - 2400 A
ENCLOSURE Weigth 29000 kg
Built Level 40 ft ISO Container (High Cube)
Length 12.19 m
Width 2.44 m
Height 2.90 m
IP-rating IP 54
HYDROGEN FEED Quality Grade ≥ 2.5 (CO < 0.2 ppm)
Supply pressure 0.3 – 6 barg
Nominal consumption 59 kg/MWhe
Max consumption 80 kg/h
COOLANT Medium DI water or BASF FC G20
Outlet Temperature Max 65 °C
Required Cooling Capacity 1800 KWth
Recoverable heat >800 kWth
AMBIENT CONDITIONS Operating Temperature -5 – 40°C
Storage Temperture 5 – 60°C (optional -20°C – 60°C)
APPLICATION Intended use Residential Blocks
Commercial and institutional facilities
Chemical sites
Placement To be placed on flat concrete surface or steelframe
LIFESPAN Balance of Plant 20 years
Stack Refurbishment 24k - 30k running hours
COMPLIANCY Standards IEC-62282-2