PemGen CHP-FCPS-120

The CHP-FCPS-120 is a Combined Heat and Power PEM Fuel Cell System intended for co-generation applications in the built environment. The CHP-FCPS-120 is optimized for integration in fourth generation heat-grids and allows for seamless integration in electricity grids by being able to use all sorts of commercial-off-the-self power electronics. Get in touch to tune this system to your application.
GENERAL Fuel Cell Type Low Temperature Proton Exchange Membrane (LT-PEM)
Fuel Cell Model 12 x Nedstack FCS13-XXL
ELECTRICAL Peak Power (BoL) 148 kWe
Nominal power 120 kWe
Current range 0-200 / 0-400 A
ENCLOSURE Weigth 2500 kg
Length 2010 mm
Width 1100 mm
Heigth 2090 mm
IP-rating IP 54
HYDROGEN FEED Quality Grade ≥ 2.5 (CO < 0.2 ppm)
Supply pressure 0.3 - 4 barg
Nominal consumption (BoL) 59 kg/ MWhe
Max consumption 8 kg/h
COOLANT Medium DI water or BASF FC G20
Outlet temperature Max 65 °C
Required Cooling Capacity 180 kWth
Recoverable heat 80 kWth
AMBIENT CONDITIONS Operating Temperature -5 – 40°C
Storage Temperature 5 – 60°C (optional -20°C – 60°C)
APPLICATION Intended use Residential blocks, Commercial and insitutional facilities and Chemical sites
Placement To be placed on flat concrete surface or steelframe
LIFESPAN Balance of plant 20 years
Stack refurbishment 24k - 30k running hours
COMPLIANCY Standards IEC 62282-3